​AGGRESSER Sponsons for STXR Slicing and Dicing
 This month we look at the AGGRESSER Sponsons for the STXR. At first look, they are the thinnest sponsons we have seen @ ¼ inch thick, they definitely have the market cornered as the thinnest sponsons available. Okay, I know what your thinking. Since they are so thin they must be weaker? WRONG, They are made from a material G-10 that is very strong. This material is a woven fiber incased in resin. It is similar to Fiberglass but stronger.
Another big difference with the AGGRESSERS, is the fact that they do not use a spacer plate, They bolt right to the hull. When we flip the Aggresser fin over and look at the backside, you will see it is machined to fit the hull with an angle cut. According to Bobby at AGGRESSER, when you are in a turn the fin will be straight up and down acting like a rudder/skaggs in the water. This helps with hook up and gives you a slot car type feel in the steering. Bobby also mentioned, by not having a spacer plate you will not experience any flex in the fin and that will give you more consistent and predictable handling with the benefit of your jet pump staying hooked up. The reason for better pump hook up is when you add a spacer plate your widening your hull (like have pontoons on the side) and with these 2 seater and 3 seater hulls they are already wide enough, not to mention that it would create boat lift and help the pump become unhooked when running spacer plates. So you can see it is an advantage not to run a spacer plate and to be as thin as possible.
Lets put them on! First, we removed the stock sponsons and spacer plates, then we proceed to clean the hull where sponsons will be placed. I added thick beads of silicone to the back side of the AGGRESSER fin, then added screws using the stock holes and tighten, same for other side. Its an easy install.
Now for first ride, you notice right a way an improved and controlled ride. The STXR felt like a slot car or corvette on steroids, impressive! You will notice how the STXR cuts through the chop with ease. Now, for the real test, hitting a hard right turn! The STXR stuck like glue in the corner! I would say the AGGRESSER’s are a valuable asset for any sport rider, rec rider or full on pro rider!
They also have them for Sea Doo, Kawasaki, Yamaha and Honda

​Our Pro Jet Ski Kawasaki Oil Change Kit Fits 1 engine for Kawasaki 4-stroke
4 Quarts of High Performance Maxima PWC Marine 4T 10w-40 Oil
1 Performance Oil Filter

Do you need a new Jet Ski Impeller for your Kawasaki Sea Doo Yamaha or Honda? Check out this Impeller instructions page over at Solasimpellers.com if you plan on doing the install yourself.. Equipped with a impeller Installation diagram. Or Call 909-271-2223

NEW Black Inland Jet Rider shirt available starting at $12.95.

​You've now found the staple Jet Rider t-shirt of your jet ski wardrobe. It's made of a thicker, heavier cotton, but it's still soft and comfy. And the double stitching on the neckline and sleeves add more durability to what is sure to be a favorite!
• 100% ringspun cotton
• 4.5 oz/y² (153 g/m²)
• Pre-shrunk
• Shoulder-to-shoulder taping
​• Quarter-turned to avoid crease down the center

Replacement Sea Doo Carburetor set for the SeaDoo GSX 1998, XP Ltd 98-01 XP 2000 RX RV GTX 950 947 951cc models. These Dual Sea Doo carbs come assembled and ready to put on. BN46i-42-b4 270500332 270500331

Inland Jet has been manufacture Jet Ski, ATV products since 1996. They are a leader in the powersports industry. 

Inland Jet Aggresser Sponsons

INLANDJET Aggresser ride plates

Inland Jet Pro Impellers

Inland Jet Aggresser Pump Wedges

​InlandJet Carbon AGGRESSER Sponsons You get quicker lap times and knock seconds off your slalom time. These are a Must for awsome handling (Slot Car Turning)& top speed (Real World fastest on planet). Made of strong lightweight G-fiber materials (not plastic). They are lighter then other Jet Ski sponsons and streamline in design for the ultimate in handling and top speed (like riding on rails). InlandJet Aggresser Sponsons are thinner (1/4 inch thick) and have less drag then all other Sea Doo sponsons. These Jet Ski sponsons do not create aggraviting boat lift, and help in reducing porposing (keeps pump in the water for better hook up and excelleration). These adjustable sponsons have UV protection from the suns harmful rays. Also, will out perfrom other sponsons. The InlandJet Aggresser are machined on the back side of sponsons to match up against your hull for a custom fit. Available for: Kawasaki, Yamaha, Honda and Sea Doo. If you have any questions during install please call before installing Sponsons to get the perfect fit. We will be glad to walk you through installation!!!
.
2018 - Spark 2UP
2018 - Spark 3UP
2018 - Spark 2UP HO
2018 - Spark Trixx
2017 - Spark 2UP
2017 - Spark 2UP HO
2017 - Spark 3UP
2017 - Spark Trixx
2016 - Spark 2UP
2016 - Spark 2UP HO
2016 - Spark 3UP
2015 - Spark 2UP
2015 - Spark 2UP HO
2015 - Spark
2015 - Spark 3UP
2014 - Spark
2014 - Spark 3UP
2014 - Spark 2UP
2014 - Spark 2UP HO

Jet Ski Parts Sale Everyday.  No need to pay high prices for jet ski accessories. If you ride Jet Ski, Sea Doo, Wave Runner or Honda Aquatrax Then we have the store for you. This watercraft store has the best prices and parts to chose from. We also have some of the best mechanics to help you with your tech questions.

Here is a taste of some of the New Jet Ski accessories coming for 2016 Jet Ski parts catalog. Available 4-15-16

- Boysen Power Reeds
- Colored Fuel Line
- Wiseco Pistons Sea Doo RXP 215/255/260
- FX Engine gasket kits
- Sea Doo Exhaust Manifolds
- Yamaha Exhaust Kit
- Sea Doo Exhaust Kit
- MSD
​- Sea Doo MPM
Jet Ski Parts